GAUGE WITH DIAL INDICATOR

- Control set with dial indicator developed for various outer diameters and channels providing high speed part measurement and control.
- As a standard, it is performed with a straight jaw; special measurements jaws are available according to the condition of the part.
- Resetting gauge is used since it has a dial indicator.

RING GAUGES

- Outer diameter control gauge with fixed dimensions required for high speed control enabling the operator to decide, accurately and without any uncertainties, in mass production control and part selection processes.
- Go - No Go parts are produced separately.
- Particularly, it catches the ovality (centreless grinding ovality) immeasurable by measurement tools measuring from two points.
- Completely produced in accordance with international norms (Geometric and dimensional tolerances).

-------------------------------------------------------------------------------------------------------------------------------------------------

FORK GAUGE

- Outer diameter control gauge with fixed dimensions required for high speed control enabling the operator to decide, accurately and without any uncertainties, in mass production control and part selection processes.
- It can have various mouth structures. (Retaining pin, O-Ring groove, etc.)
The standard structure is as seen in the picture.
- Fork gauge tolerances are produced in accordance with international norms, including geometric tolerances.
- You can make a fork gauge design and its tolerances at our web site.

PLUG GAUGES

- Fixed size bore control gauge with fixed dimensions required for high speed control enabling the operator to decide, accurately and without any uncertainties, in mass production control and part selection processes.
- Long side is ‘Go’, short side is ‘No Go’.
- Plug gauge tolerances are produced in accordance with international norms,
- Besides, surface roughness, ovality and conicity have tolerances.
- You can make a plug gauge design and its tolerances at our web site.

PNEUMATIC PLUG GAUGE

- It is a pneumatic inner diameter measurement tool, able to indicate numerical values, developed for mass control purposes regarding mass produced bores.
- It is produced according to the preferred bore. It is always used with two resetting gauges. In some cases, a single resetting gauge is sufficient.
- Compared to similar measurement tools, it has the longest service life and it is the most sensitive one.
- It is practical and it can be used by anyone without any problems in production medium.

PNEUMATIC RING GAUGE

- It is a pneumatic outer diameter measurement tool, able to indicate numerical values, developed for mass control purposes regarding mass produced bores.
- It is produced according to the preferred outer diameter. It is always used with two resetting gauges. In some cases, a single resetting gauge is sufficient.
- Compared to similar measurement tools, it has the longest service life and it is the most sensitive one.
- It is practical and it can be used by anyone without any problems in production medium.

PNEUMATIC FORK GAUGE
- It is a pneumatic measurement tool, able to indicate numerical values, developed for mass measurement purposes regarding mass produced long shafts or measurements required between two centers.
- The pneumatic fork gauge shown in the picture measures piston rod housing produced for crank shaft.

JOHNSON GAUGE HOLDER (PARALLEL BLOCK GAUGE)

DIAL INDICATOR TABLE

- It is a set with universal dial indicator used when sensitive and high speed outer diameter or height measurement is required. Whether it is a serial or a single part, it is easily adjustable. Johnson gauge is usually used for resetting gauge. When required for controlling production, resetting gauge is manufactured separately.

INNER DIAMETER MEASUREMENT TOOL WITH DIAL INDICATOR

- It is a plug gauge with a dial indicator developed as a substitute for plug gauge for indication of numerical values. It is manufactured for a single measurement and can be used within the range of ±0.2.
- It operates together with resetting gauge.
- It is ordered by specifying the measurement points for blind hole and open hole.

SCREW PLUG GAUGE

- It is a fixed size gauge for controlling the thread thickness through the average diameter (da) of the screw threads opened in the inner diameter by a screw guide or lathe. Control is very accurate. It is free from the initiative of the operator. ‘Go’ part fits, ‘No Go’ part does not fit.
- It is produced completely in accordance with international norms.

UNIVERSAL INNER AND OUTER DIAMETER MEASUREMENT APPARATUSES

- It is a hand-set with dial indicator, containing a face-rest surface contacting the part at 3 points and developed for inner and outer diameters and large size parts.
- Jaws are manufactured according to the place of use. It is always used as a set together with resetting gauge.
- It is easily adjustable if resetting gauge is ready.

HAND-SET WITH DIAL INDICATOR

- It is a hand-set with dial indicator, contacting the part at three points, developed for O-Ring retainer pin groove diameter opened in inner or outer diameter or diameter measurement in special cases.
- Special jaws are produced according to the produced part; face-rest is present at the jaws.
- It forms a set together with resetting gauge